Dürkopp Adler 867 Service Instructions Manual

Also see for 867: Instruction manual Parts list Instructions Instructions Instructions

Contents

Dürkopp Adler 867 Service Instructions Manual Manual pdf 29 page image

Positioning the toothed belt wheelsService Instructions 867 - 03.0 - 10/2017 27Machines withnormal lengths4. Additional setting step for machines with normal lengthsMove the upper toothed belt wheel (1) to the side such that the distanceto the winder wheel (3) is 0.8 mm.5. Tighten the setscrews (2).6. Use the screwdriver to push the toothed belt (4) back again.6.2 Lower toothed belt wheelProper settingThe two setscrews for the lower toothed belt wheel are seated completelyon the surface of the lower shaft.The toothed belt runs correctly without running against the retaining ringor slipping off.Cover• Tilt the upper section ( p. 14)Fig. 15: Setting the lower toothed belt wheelWARNINGRisk of injuryCrushing injuries from moving parts.Switch the sewing machine off before you checkand set the lower toothed belt wheel.2134(1) - Toothed belt(2) - Retaining ring(3) - Lower toothed belt wheel(4) - Setscrews