DAELIM Roadwin 250R Fi Owner's Manual

DAELIM Roadwin 250R Fi Owner's Manual Manual pdf 31 page image

29r the engine has been warmed up,motorcycle is ready for riding.ile the engine is idling, pull in thech lever and depress the gearshiftal to shift into 1st (low) gear.ly release the clutch lever and atsame time gradually increase engined by opening the throttle. Coor-tion of the throttle and clutch leverassure a smooth positive start.en the motorcycle attains a mode-speed, close the throttle, pull in thech lever and shift to 2nd gear bying the gearshift pedal.s sequence is repeated to progre-ely shift to 3rd, 4th, 5th (top) gear.rdinate the throttle and brakes foroth deceleration.h front and rear brakes should beat the same time and should not belied strongly enough to lock theel, or braking effectiveness will beced and control of the motorcycleifficult.If you gear down when you need todrastically accelerate speed such as whenyou are passing another motorcycle, speedcan be accelerated. If you ride too fast, itadversely affects engine because enginerevolution is excessive.12 3 4 5INGCAUTIONNOTETouch pedal lightly with foot andshift gear perfectly until you hear"Click" at the pedal. If you applyexcessive force when shifting gear,transmission may be damaged.Make sure side stand is in originalposition prior to starting motorcycle.If side stand moves unsatisfactorily,check lubrication state on side standjoint.Shift gear adequately according tovehicle speed.To save fuel and maintain optimumvehicle life, do not accelerate ordecelerate speed abruptly.Always start in the 1" gear, and startcarefully as slow as possible.If you hear abnormal noise duringtravel, contact authorized main-tenance shop immediately forinspection and necessary action.Maintain legal speed limits.●●●●●●●