21-5TROUBLESHOOTINGINSPECTION CAUSE OF TROUBLEINSPECTION CAUSE OF TROUBLECushion spring weak.Overloaded.Damper oil leaks.Fork pipe or cushion rod bent.Sliders stuck.Cushion stopper rubber damaged.1. Suspension excessively soft.2. Suspension excessively hard.3. Noise from the suspension.POOR FRONT/REAR SUSPENSION PERFORMANCEFUEL GAUGEFuse cut.Battery weak or totally discharged.Faulty ignition swtich.Faulty terminal connection.Wire harness damaged.Faulty float.Balance coil damaged or shorted.Terminal loose.Faulty terminal connection.Balance coil/lead shorted ordamaged.GAUGE READING INACCURATE (IGNITION SWTICH ON)1. Operate the turn signal to check thebattery circuit.2. Remove the fuel level sensor, andmove float to check the status ofoperation.Float up : Full positionFloat down : Empty position3. Short-circuit the tank unit terminalon the wire harness side.4. Terminal joints loose or faultyconnection.Signal continuouslyoperates dim or does notoperate at all.Needle moves.Needle not moving.UnsatisfactorySignal operates satisfactorily.CheckNeedle not moving.Needle not moving.
