Chapter 11 Operation of Zigzag EmbroideryOwner’s Manual of BECS- A15 Computerized Control System 87Press the corresponding icon to select the very zigzag embroidery mode, if you don’t want tochange, and then press to exit. After confirmation of the embroidery mode and thesetting of color-changing order, the system will display as below:11.5.2. M Axis Operation of Zigzag EmbroideryThe operations about M axis contain “M axis to be ready”, “M axis to cycle” and “Maxis to turn”, which are all in the Assistant Functions. In the main interface, you can clickto enter into the “Assistant Operation” interface. Turn the page, then you can see theparameters “M axis to be ready”, “M axis to cycle” , “M axis rotate left manual” and “M axisrotate right manual” displayed in order..（1）Return M Axis to Working PointPress the key “M axis to be ready” and click on the dialogue window to let theM axis back to the working point, click to exit.
