DAITEM SC901AU Installation Manual
Also see for MHF01X: User guideUser guideInstallation manualInstallation manual
                                                                | |
Contents
| 
1. To ensure easy use, fix the unit at a heightof 1.20 m.2. Mark and drill the outdoor caller unit holeswith a Ø 6 mm drill bit.Also mark the place where the cable feedhole has to be drilled (Ø 8 mm min.recommended).1.20 mPlease refer to the next chapter for mounting outdoor caller units with armoured cover.Follow steps 3 to 6 below for units without armoured cover.3. If the cable goes around the pillar, pierceone of the cable knock-outs with a cutter.4. Push the screw covers out using a flatscrewdriver.5. Thread the cable through thehole knocked out in step 3and screw the caller unitin place. Put thescrew covers back.6. Use a pencil orpermanent markerto write the names.Stick a transparentprotection label ontop.Pozidriv 23.5TIP: you can print thelabels using thesoftware (EtikPrint)available on the Daitemweb site.IMPORTANT: to ensure the outdoor caller unit remains watertight, never try to open it!5. Installing the outdoor system5.1 Installing the outdoor caller unit15 |
Related manuals for DAITEM MHF01X
manualsdatabase
Your AI-powered manual search engine