DAKtel myhomefone DT8 User Manual
               | |
5Personal Security Communicator User ManualUsing your PersonalSecurity CommunicatorUsing the memory/speed dial numbers (M1 & M2)Your Personal Security Communicator has twopreset speed dial numbers for non-emergencycalls. Press either of these buttons to begin a call,hold down to cancel. The top green LED will lightup during a call.SOS functionalityActivating the SOS button willimmediately start an emergencycall through to up to 6 nominatednumbers. It will try each contact3 times if no answer, beforemoving on to the next contact.The receiver will be promptedto accept the emergency callby a voice recording. If you havechosen professional monitoring,your device will immediately dialour 24/7 call centre, and they willassist you. The top green LEDwill light up during the call.Turning the device onPress and hold the ON/OFF buttonfor 2-3 seconds, until the Blue LEDstarts flashing. The LED will blinkquickly while searching for thenetwork. You will hear a voice say“Device is connected”, and the LEDwill flash slowly.Turning the device offPress and hold the ON/OFF buttonfor 2-3 seconds and release, youwill hear a chime, and the devicewill vibrate as it switches off.Checking networkconnectivityWhen the device is on, pressthe ON/OFF button once, to heara voice announcement. |
Related manuals for DAKtel myhomefone DT8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine