DAP Technologies CE3000B Series User Manual
Also see for CE3000B Series: User guide
                                 | |
Contents
| 
www.jpwassociates.com 13DAP-000140Operation GuideNote: See underStart > Settings > Control Panel > _Power The default settings are 16% for “Low Level” and 5% for “VeryLow”Backup BatteryThe backup battery is used whenreplacing the main battery or when the main battery has expired The backup battery is kept charged by themain batteryMain Battery LowBy default, at 16% of capacity,the Low Battery Indicator willappear on the Message BarMain Batteries Very LowFollowing several hours of use, the main battery will become very low By default, at 5% of capacity, theVery Low Battery Indicator will appear on the Message BarAnd the Main Battery Very message will be displayed to the user At this stage, there is still some powerremaining but it is highly recommended to recharge the battery to avoid a loss of data This warning shall bedisplayed approximately every 4 minutes for as long as the battery is below 5 %Main Battery ExpiredShould the user continue to work with the unit,at some point the Main Battery Expired messagewill appear, the units beeps 3 times and suspendThis cycle could happen for sometime if the userpersists to resume the unit and try to continueworking with itWARNINGAt this point, data may be lost if the unit is notre-charged immediatelyBATTERY WARNINGSNote: To check how much power remains click on: Start > Settings > Control Panel > Power > Battery |
Related manuals for DAP Technologies CE3000B Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine