DAP Technologies 1-19Getting StartedConnecting to AC PowerThe M9020 operates either on external AC power or internal battery power. It isrecommended to use AC power when you start up the device for the first time.CAUTION: Use only the AC adapter included with your M9020. Using other AC adapters maydamage M9020.Perform the following to connect the M9020 to AC power:1. Plug the DC cord of the AC adapter into the power connector of theM9020.2. Plug the female end of the AC power cord into the AC adapter.3. Then plug the male end of the AC power cord into an electrical outlet.123When the AC adapter is connected, the battery pack is charging.CAUTION:• When you disconnect the AC adapter, disconnect from the electrical outlet first andthen from M9020. A reverse procedure may damage the AC adapter or M9020.• When unplugging the connector, always hold the plug head. Never pull on the cord.
