DAPAudio CLUBMATE III Manual

Contents

DAPAudio CLUBMATE III Manual Manual pdf 10 page image

9Clubmate III™Ordercode: D3265Set Up and OperationThe satelliteThe Clubmate III satellite is designed to produce a mid/high spectrum of sound. The satellite is equippedwith a 12” LF loudspeaker and 1,75” HF driver with a horn with a dispersion of 60˚x40˚. The built-in amplifierdelivers 600W pure sound.The subwooferFeel the bass with this 15” basscabinet. The cabinet is powered through a powerful 600W amplifier.Linking Satellites / SubwoofersConnect the cables coming from the mixer to the fullrange in (5/16) combo input of any component.Connect a standard XLR microphone cable from the first unit's fullrange (4/15) out XLR output to thesecond unit's fullrange in (5/16) combo input. Repeat this process to link subsequent units. Repeat this foreach stack. Make sure that when using multiple tops, they are placed with a proper projection angle.Note: Do not supply power before all components of the system are set up and connected properly.Make sure that the Club Mate system is always the last component, which is switched on! When shuttingdown, the Club Mate should be the first system, to be switched off.Set up example

/ 13

Related manuals for DAPAudio CLUBMATE III