DAPAudio COM-AT Manual
            | |
5COM-ARTOrdercode: D1414Description of the deviceFeaturesThe COM-ART is a PLL UHF wireless audio set. The set consists of one transmitter and one receiver. Thesmart and lightweight design enables you to connect the receiver directly to any amplifier or activespeaker. Both the transmitter and receiver can be powered with an AA battery or a USB power supply.The device operates properly within the range of 50 meters, in an ideal situation. In order to use theCOM-ART for stereo purposes, you will need to purchase 2 sets. The frequency range 606-630 MHz isdivided into 16 frequency presets.COM-AT (Transmitter) Channel: Multi-channel, up to 16 frequency presets per each frequency band Frequency band: UHF 606-630 MHz, dependent on applicable country regulations Frequency response: 30 Hz - 17 kHz (±3dB) Oscillation mode: PLL UHF SYNTHESIZED Range: <50 m Frequency stability: ±0.005% (-10 ~ 50°C) T.H.D.: 1 kHz <0.3% Modulation mode: FM (F3E) Signal to noise: >98 dB Dynamic range: >100 dB RF output power: 10 mW Max. balance input/deviation: Max. 8 dBu/±50 kHz Power requirements: AA (LR6) 1,5V Power supply: 5V DC (500 mA) Dimensions: 114 x 22 x 23 mm (LxWxH) Weight: 0,02 kgCOM-AR (Receiver) Channel: Multi-channel, up to 16 frequency presets per each frequency band Frequency band: UHF 606-630 MHz, dependent on applicable country regulations Receiver type: PLL UHF SYNTHESIZED Range: <50 m Frequency response: 30 Hz – 17 kHz (±3dB) Frequency stability: ±0.005% (-10 ~ 50°C) T.H.D.: 1 kHz <0.3% Modulation mode: FM (F3E) Signal to noise: >98 dB Dynamic range: >100 dB RF sensitivity: -100 dBm/12 dB SINAD Max. balance output/deviation: Max. 8 dBu/±50 kHz Power requirements: AA (LR6) 1,5V Power supply: 5V DC (500 mA) Dimensions: 101 x 22 x 23 mm (LxWxH) Weight: 0,02 kg |
Related manuals for DAPAudio COM-AR
manualsdatabase
Your AI-powered manual search engine