DAPAudio K-115 Product Manual
         | |
6MaintenanceThe K-115 requires almost no maintenance. However, you should keep the unit clean. Disconnect themains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.Keep connections clean. Disconnect electric power, and then wipe the audio connections with a dampcloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.TroubleshootingDap Audio K-115This troubleshooting guide is meant to help solve simple problems.If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unitoperates properly, do not carry out following steps.1. If the device does not operate properly, unplug the device.2. Check the power from the wall, all cables etc.3. If all of the above appears to be O.K., plug the unit in again.4. If you are unable to determine the cause of the problem, do not open the device, as this maydamage the unit and the warranty will become void.5. Return the device to your Dap Audio dealer.Product SpecificationsModel: DAP Audio K-11515/1 passive plastic vented PA speaker systemWoofer: 15”, 8 Ohm63 mm Voice CoilHigh Driver: 1.375” Titanium Dome, 8 Ohm,63 mm Voice CoilNominal Impedance: 8 OhmPower Handling: 225 Watt Continuous450 Watt Program900 Watt PeakFreq. Response (-3 dB): 60Hz – 16.000 HzFreq. Range (-10 dB): 45Hz – 20.000 HzSensitivity (Full Space): 96 dB / W / mPeak SPL at 1 m (Theoretical): 125.5 dBNominal Dispersion (H x V): 65° x 65°Dimensions(W x H x D): 450 x 690 x 350 mmNet Weight: 19.68 kgSpare parts:• SPLEE003 K115 Bass speaker 15 inch• SPLEE005 K115 Crossover• SPLEE010 K112/K115 High recone• SPLEE0001 K112(A)/K115(A) High driverWebsite: www.Dap-audio.infoEmail: service@highlite.nl |
Related manuals for DAPAudio K-115
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine