DAPAudio PM-Six Manual

Contents

DAPAudio PM-Six Manual Manual pdf 7 page image

6Ordercode: D6182PM-SixMessage bankPress one of the 1-6 buttons to recall the desired preset message.Repeat/Stop + Start/Stop buttonsPress one of the buttons to play the chosen message.REPEAT/STOP: Press the button to play the chosen message. The message will be repeated until thebutton is pressed again.START/STOP: Press the button to play the chosen message. The message will be played once. Pressthe button again to stop playback.LED indicatorsPOWER: Power indicatorSEND: The indicator lights up when communication data is available.BUSY: The indicator blinks when the line is busy. The TALK and MESSAGE BANK buttons will not work.Zone selection buttons + TALK buttonPress one of the zone buttons 1-6 to choose the desired zone. Press the ALL button to activate all 6zones, at maximum volume level.If you use a single PM-Six, and Chime mode is active, press the TALK button, wait until the chimesound passes, and then talk. When Chime mode is inactive, always press this button to talk.If you use multiple devices and DIP switch # 2 is set to PRIORITY position, press the TALK button to talk.If DIP switch # 2 is set to SLAVE position and the BUSY LED indicator blinks, it means that the line is busyand you need to wait until the LED indicator stops blinking.BacksideFig. 02USB connector BConnect your PC to the device, in order to update the software or the chime sound.Chime/Program switchInsert a USB flash drive, containing updates. Set the selector to the section which you would like toupdate.Set the selector to CHI, if you want to update the chime sound.Set the selector to PROG, if you want to update the software and audio priority setting.