DAPAudio WCA Pack Product Manual
                 | |
10Connecting the transmitter to a cameraConnect the 3,5 mm jack of the KAC50X camera cable into the AF out (13) and connect the XLR plug tothe camera.Fig. 7Charging the batteriesPlace the receiver and transmitter in a free charging slot (25) of the battery charger. The correspondingcharging (26) LED will flash for a few seconds for initial testing and then light continuously while charging.The charging (26) LED will dim if the corresponding battery is fully charged.Fig. 8Tips for achieving maximum performance Make sure you can always see a receiver from the transmitter position. Keep the distance from transmitter to receiver as short as possible. Avoid placing the receiver near metal surfaces and obstructions. Replace battery as soon as the power indicator (3, 12) LED of the transmitter or the receiver lights red. Perform a walk-through before performance or presentation. If dead spots are found, adjust thelocation of the receiver. If dead spots remain, mark the dead spots and avoid them. |
Related manuals for DAPAudio WCA Pack
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine