Page 10 of 174. MaintenanceThe proposed maintenance is only a suggestion. Depending on the use of the productand the operating environment, this may need to be revised more often.DO NOT ATTEMPT ANY FIXES BEFORE CONSULTING DARAY.If you cannot resolve a problem then please contact our helpline on 0800 878 9864or email support@daray.co.uk4.1 Maintenance scheduleWeekly checksshould include:-Range of movement testing, it should be light and easy to movethroughout the rangeNo visible signs of excessive wear.Monthly checksto include:-Check the joints and thumb screws for wear and report asnecessarySix monthlychecks toinclude:-Check all electrical connections are sound and that there is novisible cable wear.All fixings to be checked and be of sound construction.4.2 Safety Precautions For all cleaning work, power off the equipment and where possible unplugthe mains socket, only minimal cleaning fluids should be used. Please do not look directly into the light source when illuminated. If the equipment is dented or scratched this should not impact the usabilityof our lights however we advise that if the BioProtect® coating is damagedand the metal casing underneath is visible, please do not attempt to ‘paint’over it as this will impact upon the effectiveness of the coating, simply usean alcohol based cleaning spray when cleaning and pay special attention tothe cut.If there is damage to the power cable or if exposed wire is visibleDO NOT USE