8 FIRST OPERATION1 Boiler Selection Knob2 Computer Connection Inlet3 Exit4 Reset5 Manual Control Knob6 Pipe Function Knob7 Confirm Button8 Set Button9 Information Button10 Operation Mode SelectionButton11 LCD Display8.1 Heating Mode SelectionWhen you press operation mode selection(number 10) knob, you can make passingbetween modes that are explained in thefollowing.Modes are;OFFConcort ModeNight ModeAutomatic ModeOFF: Device waits in standby mode. Exceptfreezing prevention it does not operate anyfunction.Comfort Mode: Operates according to settemperature.Night Mode: Operates according to settemperature.Automatic Mode: Enables to operate dependinghour time. General operation mode of the systemwill be this.8.2 Setting Time Hour1- It is entered to submenu by pressingconfirm button (number 7) while it is inhome screen of device.2- It is entered to “Time program of heatingcycle 1” menu by pressing OK button.3- Firstly, it is chosen for which day’sprogram will make. You can makepassing between options with Set Button(number 8). When you come to yourdemanded days, make your choosingwith OK button.4- Set the operation start hour and pressthe OK button.5- Then set operation finish hour and pressOK button.6- Return to home screen by ESC buttonafter you chose AUTO, your device willstart to operate according to setoperation hour.8.3 Room Temperature SettingWhile the device is in home screen, turn thenumber 8 button. Temperature values will beappearing at the display. Exit from menu with OKbutton after you bring your demanded value.8.4 Manual UsingIt is used for operating device independent fromauto operation mode. Manual control can beactivated or passivity with number 5 knob.Intended boiler temperature can be set from infomenu.8.5 ResetWhen your device goes out of order, errordescription is written on the display and passes tostandby mode. Do not forget that, this device canbe gone out of order at gas leakage andinstallation failures. After making control ofthese, try restart again by pressing number 4reset knob. After trying 3 times if the device hasstill not operated, contact with authorizedservice.9. MAINTENANCEAs well as it changes using place and usingconditions, it is preferred to have your devicemaintenance done once a year.It is importantly preferred, have your boilermaintenance done by authorized service agencyand using original parts while changing necessaryparts. Do not forget that your device will be outof warranty in case of intervention of authorizedpersonnel or using parts which are not original.It is needed to have your installation controlmade together with boiler maintenance forunproblematic operation of the system.