DCB PR-6606 User Manual
                                                  | |
Contents
| 
ConfigurationFeaturesOther ProtocolsThe PR-6606 operates only on UDP/IP packets. All other protocols are passed through the deviceunchanged.DHCP ProtocolThe PR-6606 may be configured as a DHCP client.Extensive Packet Selection RulesUser defined selection criteria is configured in "rules". Each rule allows packets to be selected based uponsource IP address, destination IP address, and destination IP port number. IP address and port entries may bea single value such as one IP address (192.168.2.2 for example) or one port number (for example 3001) or arange such as 192.168.1.2 to 192.168.1.230 or port 5001 through 8000. If no port number is entered, allUDP packets meeting other selection criteria are duplicated. To insure the PR-6606 will replicate thedesired packets, the PR-6606 must be inserted in the network path between the original packet's source andoriginal packet's destination. Furthermore, to prevent MAC table corruption in any layer-2 switches, thedestination of a replicated packet must also reside on a different LAN port from the original source. Tosummarize, the original source cannot be located on the same PR-6606 LAN port as the original destinationor replicated destination.Upgradeable FirmwareFirmware upgrades may be installed using any web browser.Security FeaturesThe web interface used to configure the PR-6606 may be secured using HTTPS SSL. The secure webserver operates using the SSL protocol which allows for the use of x509 certificates to identify andauthenticate web servers and web browsers. You may generate a pair of x509 certificates within thePR-6606 or import certificates from your external certificate authority.On-board ToolsThe PR-6606 contains diagnostic tools such as extensive logging, statistics, traceroute, ping, and a simplepacket sniffer to aid in network troubleshooting.Installation LocationTo insure the PR-6606 will replicate the desired packets, the PR-6606 must be inserted in the network pathbetween the original packet's source and original packet's destination. Furthermore, to prevent MAC tablecorruption in any layer-2 switches, the destination of a replicated packet must also reside on a differentLAN port from the original source. To summarize, the original source cannot be located on the samePR-6606 LAN port as the original destination or replicated destination.Package ContentsYou should find the following items in the package: The PR-6606 Power Adapter This User’s Guide CDROM 9-pin Remote-PC adapter (Units with serial ports only)If any of the above are missing, contact your dealer immediately.5 |
Related manuals for DCB PR-6606
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine