DCI Edge 4 series Installation Instructions Manual
Also see for SERIES 4: Installation instructionsInstallation instructionsInstructions for use
              | |
SETUPTOOLS NEEDED FOR INSTALLATION• Scissors or utility knife• Allen wrench set• Socket wrench setINCLUDED HARDWARE AND COMPONENTSWARNING: To prevent injury, use anassistant to help safely position the chair inthe operatory.PLACE THE CHAIR IN LOCATION1 Remove the shipping straps and open the crate.2 Remove the 3/8” bolts holding the chair to thewood pallet.3 Carefully remove the chair from the pallet and position it in the proper location for installation. Refer to dimensionalinformation on the next page for guidance in positioning the chair.4 Check that the chair rests flat and level on the floor and that it does not rock due to uneven areas on the floor.Use shims to eliminate gaps if the surface is uneven.• Power Switch Cover4SERIES 4 DENTAL CHAIRInstallation Instructions• Backrest Wire Cover and Fasteners |
manualsdatabase
Your AI-powered manual search engine