DCI LLC 10/100Base-TX to 100Base-FX PoE PSE FE Media Converter User Manual
               | |
1. OverviewIEEE802.3u 100Mbps Fast Ethernet supports two types of media, 10/100Base-TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through)feature enhances the TP-Fiber Link integrity and conformity. Either one of TP orFiber port is in link-fail state, the LFP converter forces the other port to be at link-disabled state. The PSE media converter complies with IEEE 802.3af, its advancedauto-sensing algorithm enables providing power devices (PD) discovery,classification, current limit, and other necessary functions. It also supports high safetywith short circuit protection and power-out auto-detection to PD.2. Model DescriptionModel Power DescriptionPoE PSE TP-Fiber AC Line: 100-240V 50-60HzThe 100Mbps Fiber Transceiver WavelengthST/SC/LC multi-mode 2Km 1310nmSC/LC.S05/S20/S40/S60Kmsingle-mode 1310nmSC/LC.S80/S100Km single-mode 1550nm∗:Any other fiber model, such as MT-RJ is available upon request.Single Fiber Model TX, RX WavelengthTX (Transmit) 1310nm1310nm Single-Mode 20Km∗ 40/60Km models are option RX (Receive) 1550nmTX (Transmit) 1550nm1550nm Single-Mode 20Km∗ 40/60Km models are option RX (Receive) 1310nmNote:The 1310nm and 1550nm models must be installed in pairs, i.e., install 1310nmmodel at one end and 1550nm model at the other one.1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine