DCN DCRS-5960-52T Installation Manual
                          | |
Contents
| 
DCRS-5960 Series Installation Guide Chapter 2 Hardware Installation2-7Fig 2-2 Connecting Console to switchThe connection procedure is shown below:1. Find the console cable provided in the accessory kit. Attach the Mini-USB end toconsole port of the switch.2. Connect the other side of the console cable to a character terminal (PC).3. Power on the switch and the character terminal. Configure the switch through thecharacter terminal.2.3.3 SFP Transceiver InstallationDCRS-5960 series provide multiple 1000Mb SFP transceiver slots.The procedure for installing SFP transceiver is shown below:Step 1: Put on a ESD wrist strap (or antistatic gloves).Step 2: Insert SFP transceiver to the guide rail inside the fiber interface line card. Do notput the SFP transceiver up-side-down.Step 3: Push SFP transceiver along the guide rail gently until you feel the transceiver snapinto place at the bottom of the line card.Note: SFP transceiver supports the hot swap.Caution!Do not stare directly at the 2 fiber bores in the SFP transceiver when the switch is inoperation, otherwise the laser may hurt your eyes.2.3.4 MRS-2XFP Extended Module Installation |
Related manuals for DCN DCRS-5960-28F-DC
manualsdatabase
Your AI-powered manual search engine