13INSTALLATIONCAVITY DIMENSIONSBE1-48R BE1-36RInches (mm) Inches (mm)A Maximum height of enclosure shell 35 1/2" (902) 35 1/2" (902)B Depth of enclosure shell 22 3/4" (578) 22 3/4" (578)C Minimum depth for hood swing 3 3/4" (95) 3 3/4" (95)D Width of enclosure cavity 45 3/4" (1162) 34 1/2" (876)E Height of enclosure cavity 10 1/8" (257) 10 1/8" (257)f Depth to gas supply opening 18 1/2" (464) 18 1/2" (464)G Height to base of vents 1" (25) 1" (25)H Height of opening for access doors/drawers 20" (508) 20" (508)I Width of opening for access doors/drawers 46" (1168) 34" (864)DEHIGFABCBuilt-in Construction DetailsStandard layout for non-combustible cavityIMPORTANT!If installing the grill into a non-combustible enclosure, all combustible construction must still beoutside the 18" (457mm) clearance zone. If your island is made of stucco over the top of woodenstuds, the wood can not be inside the 18 inch clearance zone to combustible, even though the stuccois what is touching the grill area.Note: vents are to be located at the left,right and rear of the enclosure. Minimumsize of all vents is 10x10" (645mm x 645mm)Note: 4x4” (102 x 102mm)opening for gas supply lineFIG. 05Note: the cut-out of eachcorner should be a 90°anglein order for the access doors/drawers to fit properly.EN