DCS BH1-48R Series Installation Instruction

Also see for BH1-36R Series: Installation guide Installation guide INSTALLATION GUIDE/USER GUIDE Installation guide

Contents

DCS BH1-48R Series Installation Instruction Manual pdf 14 page image

21NOTE:If any of the listed items are missing, contact DCS at (888) 936-7872. Please be prepared with yourModel #, Serial # and description of item(s) that are missing.Read all installation instructions in this manual to see if the unit has been properly installed. If not done ordone correctly, correct before using the unit.o Specified clearances main-tained to combustibles.o Verified proper enclosureventilation.o All internal packaging andany adhesive residueremoved. To remove stub-born residue, use rubbingalcohol or a commerciallyavailable adhesive remov-er.o Removed shipping brack-etso Knobs turn freely, bezelscentered.o Each burner lights satis-factorily, individually orwith adjacent burner lit.o Air shutters adjusted.o Low flame setting satis-factory.o Drip pan in place properlyand sliding freely.o Pressure regulator con-nected and set for 4.0”W.C. Natural, 11.0” W.C. LPgas.o Manual shut-off valveinstalled and accessible.o Unit tested and free ofleaks.o User informed of gassupply shut-off valvelocation.o All radiants are assembledand put in place.o Check match lighting.n PLEASE LEAVE THESEINSTRUCTIONS WITH THEUSER.n USER, PLEASE RETAINTHESE INSTRUCTIONSFOR FUTURE REFERENCE.INSTALLATIONINSTALLER CHECKLISTTag location ofModel # and Serial #

/ 14

Related manuals for DCS BH1-36R Series