7ASSEMBLY INSTRUCTIONSCAUTION:Some parts have sharp edges; care must be taken when handling the various components to avoid injury. Pleaseread safety information provided in these instructions before beginning assembly. Wear gloves when handling.STEP 1 POST INSTALLATIONA. Insert post into the cabinet top. The threadedhole should be oriented toward the front (door).B. Install rubber ring (F) over the post.STEP 2 INSTALLING THE PATIO HEATERHEADA. Remove four #10 screws holding the valvepanel using Phillips screwdriver and set themaside.B. To get access to ignition wires, disengage (gentlypull on wires) the valve panel and head body. Dis-connect ignition wires from igniter, remove valvepanel.