DCS Professional Island Vent Hood IVS40 Use And Care Manual

Also see for Professional Island Vent Hood IVS40: Use and care guide Installation guide Use and care guide Installation guide Installation guide

Contents

DCS Professional Island Vent Hood IVS40 Use And Care Manual Manual pdf 8 page image

6TO CLEAN HOOD SURFACEn For general care, wipe the outside of the stainless steel with sudsy water or household cleanerssuch as Fantastic® or Formula 409®, rinse well and dry with clean soft cloth to avoid watermarks.n Wipe and dry brushed stainless steel in the same direction as the grain.n Do not use abrasive products.n To remove finger prints and give added shine use spray cleaners such as Stainless Steel Magic®and Shimmer®LIGHTSCAUTION:Before replacing the light bulbs, switch power off at service panel and lockservice panel disconnecting means to prevent power from being switchedon accidentally.NOTE: Turn off the lights and fan. Allow the lights to cool before handling. If new lights donot operate be sure lights are inserted correctly before calling service.REPLACE LIGHTSn Remove the damaged light (twist counter clockwise) and replace with a new 120 Volt, 50 Watt(maximum) 50° halogen light made for a GU10 base.WARNING:Halogen lamps are constructed of a glass bulb with a pressurized internalfilament tube that operates at high temperatures and could unexpectedlyshatter. Should the outer bulb break, particles of extremely hot glass couldbe discharged into the fixture enclosure and/or surrounding environment,thereby creating a risk of personal injury or fire. When replacing the bulb,let the bulb cool, and assure that power to the light has been turned off.Never allow the hot bulb to come into contact with water. DO NOT TOUCHthe Light Bulb when in use. They may be hot enough to cause injury.CARE AND MAINTENANCE6