DURKOPP ADLER 911 Operating & Installation Instructions Manual
Also see for 911: Operating & installation instructionsOperating & installation instructions
                  | |
3.3 Setting the working height3.3.1 Sewing units with rollersThe working height can be set between 760 mm and 910 mm(measured up to the upper edge of the table top).Caution: Risk of injury!Do not lift the sewing unit using the table top.Put a lifting cart or a forklift underneath the sewing unit beforeloosening the clamping screw.Set the height of the sewing unit by equally pulling the tubular feet ofthe stand.– Loosen screws 1 (8x).– Set the table top to the desired height to be level.To avoid a tilting, pull out / push in the tubular feet equally on bothsides.– Fasten screws 1.61 |
Related manuals for DURKOPP ADLER 911
DURKOPP ADLER 911 Operating & Installation Instructions Manual
DURKOPP ADLER 911 - MANUAL SERVICE Operating & Installation Instructions Manual
DURKOPP ADLER 911-210 Operating Instructions Manual
DURKOPP ADLER 911-211-10 Operating Instructions Manual
DURKOPP ADLER 906 Operating Instructions Manual
DURKOPP ADLER 906 Operating Instructions Manual
DURKOPP ADLER 367 Operating Instructions Manual
DURKOPP ADLER 610 Operating Instructions Manual
DURKOPP ADLER 580 Operating Instructions Manual
DURKOPP ADLER 581 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine