DVTEL Quasar CM-3211-00 User And Installation Manual

Also see for Quasar CM-3211-00: Use and installation guide Quick installation guide

Contents

DVTEL Quasar CM-3211-00 User And Installation Manual Manual pdf 125 page image

CCM-3211 Series Installation Manual121level rather than activation of the IR LED mode. The IR Mode drop-down menuenables you to select from Auto/On/Off/Smart modes. The default mode isSmart. Following is an explanation of the four settings:o Auto Mode-the camera converts from Day mode (color) to Nightmode (monochrome) automatically at nighttime or in low lightconditions. When there is sufficient light, the camera convertsautomatically from Night mode to Day mode.o On-activates IR mode (puts camera into monochrome/Night mode).o Off-deactivates IR mode (puts camera into color/Day mode).o Smart-Smart Mode enhances monochrome/Night mode stability when IRillumination is dominant and keeps the camera from switching between Dayand Night modes. In this mode, the IR Cut filter is on (i.e.monochrome/Night mode) when the IR LED illuminator also is activated.This prevents the camera from returning to color/Day mode.Press <√> to confirm the new setting. IR LEDThis setting is used in low-light conditions or at night. IR LED lights are turned onor off, depending on the light sensor. The default mode is “Auto”. Two settingsare available:o “Auto”-the light sensor operates automatically.o “Off”-the IR light is always off.Press <√> to confirm the new settingNOTE: The IR LED function is available only on CM-3211-10-I and CM-3211-11-I.6.5.7 WDR FunctionThe Wide Dynamic Range (WDR) function is for resolving high contrast or changing lightissues in order to enhance the video display. The WDR is adjustable from “Low”, “Mid” to“Hi”. Higher level of WDR represents wider dynamic range, so that the camera can capture agreater scale of brightness. Press <√> to confirm the new setting.6.5.8 Noise Reduction