DVTEL Quasar CP-3211-180 User And Installation Manual

Contents

DVTEL Quasar CP-3211-180 User And Installation Manual Manual pdf 15 page image

Quasar CP Series HD PTZ Camera User and Installation Guide12In the DeviceSearch application, click Device Search and do the following:In the search results, click on the camera to select it.Right-click and select from the shortcut menu Network Setup.In the dialog that appears, select Static IP.Enter the IP Address, Gateway and Netmask (network mask) as needed and click OK.Disconnect the Ethernet cable and, if you are using a power supply, turn off the power to the power supply andunplug it. The camera is ready for deployment in a site installation (mounting).NOTE: The camera can be connected to a PC for bench installation via an Ethernet cross-cable.NOTE: The camera default IP Address is 192.168.0.250 and default subnet mask is 255.255.255.0.Tip: A camera setup adapter, such as Veracity Pinpoint, can be used to connect a laptop directly to thecamera when using PoE Plus.Preparing the Camera for MountingIf you have not already done so, rotate and remove the camera’s protective cover, then remove the PE cloth sheetand lens cap.Mounting InstructionsThere are four general methods to mount Quasar HD PTZ cameras: Ceiling Mount Wall Mount Corner Mount Pole MountWithin each general method there may be several mounting types available as optional packages. See Appendix G:Accessories.