Da-Lite Tensioned Professional Electrol Instruction Book

Also see for Tensioned Professional Electrol: Instruction book Instruction book

Contents

Da-Lite Tensioned Professional Electrol Instruction Book Manual pdf 2 page image

2Important Safety InstructionsWhen using your video equipment, basic safety precautionsshould always be followed, including the following:1. Read and understand all instructions before using.2. Position the cord so that it will not be tripped over, pulled, orcontact hot surfaces.3. If an extension cord is necessary, a cord with a current ratingat least equal to that of the appliance should be used. Cordsrated for less amperage than the appliance may overheat.4. To reduce the risk of electric shock, do not disassemble thisappliance. Contact an authorized service dealer when repairwork is required. Incorrect reassembly can cause electricshock when the appliance is used subsequently.5. The use of an accessory attachment not recommended bythe manufacturer may cause a risk of fire, electric shock, orinjury to persons.Save These InstructionsPre-Installation1. Carefully unpack screen.2. Make sure to recheck measurements of screen locationbefore installation.3. Remove instruction cover plate (Fig. 1). Do not removewrapping paper until screen is installed.4. Remove the retainer screws from the slat bar before thecase has been installed (Fig. 2).Figure 2Slat Retainer Bracket(3 Screws)1 On Bottom of Slat2 On Inside of CaseFigure 1Instruction CoverCase