Dacor ACTK27 Installation Instructions Manual

Also see for ACTK27: Planning guide Planning guide Planning guide Planning guide

Contents

installation instructions

Dacor ACTK27 Installation Instructions Manual Manual pdf 1 page image

1PART NAMEDUCT (A)-1DUCT (A)-2DUCT (A)-3DUCT (B)DUCT (C)STOPPERSASH (SIDE)SASH (U AND L)CUSHION (A)CUSHION (B)SCREW (A)SCREW (B)Q'TY1111122211104DUCT (A)-1 DUCT (A)-2DUCT (A)-3 DUCT (B)STOPPERDUCT (C)SASH(U AND L)CUSHION (B)(thick)CUSHION (A)(thin)(FOR ACTK27)IMPORTANT: This Built-In Kit is designed for use with those Dacor Microwave Ovens specifying ACTK27 orACTK30 Built-In Kit on rating label on the front of the oven.READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNINGINSTALLATION!INSTALLATION INSTRUCTIONS* For walls other than wood, you may need appropriate screws to install the SASH and STOPPER.* Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing a kit.Also remove the turntable tray and turntable support from the oven cavity.* Because these kits are metal, due caution should be used in handling and installation to avoid thepossibility of injury.* Two wooden supports must be provided, nominal 2"x 2"x 155 /8 " (actual 19 /16 "x19/ 16"). Contact cement isneeded for attaching. These items can be purchased from a building supply store. Check to see that theactual height of the wood is 1 9 /16 " (4.0 cm).SASH (SIDE) SCREW (A) SCREW (B)(FOR ACTK30)ACTK27BUILT-IN KIT MODELS ACTK30followed by letter indicating color S=stainless steel, R=arctic white, B=blackPart No. 900930 Rev. C