12 Service Manual - Dishwasher Models DDW24S, RDW24I and RDW24SL1T1 T2L2T4L8L3T5L9L4 L5 L6 D1, 15,D2, D311, 12,13, 14TroubleshootingOpening the service menuMake sure the dishwasher main power switch is off. Switch on the main power switch (1/0). Waitfor the numeric display to light up. Within 5 seconds, press PROGRAM (T1) and then press START(T2), and keep them pressed for 5 seconds. (L1), (L3) and (L6) lit indicates that the service menuis activated. When the service menu is opened the most recent of the error messages (D1), (15),(D2) and (D3) is shown. In order to keep the last error message in the display, release START first,otherwise the next step in the service menu is activated. All error messages are erased by a totalreset. The service menu is closed by turning off the power to the machine.PROGRAM +STARTSTART Press the button START to navigate the menu system step by step.PROGRAM Press PROGRAM repeatedly to scroll between settings. Press PROGRAM to save the setting andcontinue to the next menu step.START Press START at the last step of the menu to close the service menu and save the most recent set-tings.Menu step/Turn/Push Numeric Display Comments/instructionsSTARTPROGRAMd:01 Mixer valve and inlet valve on (1 second delay between mixervalve, if available, and inlet valve)d:02 Inlet valve and mixer valve, if available, off for 1 second then inletvalve ond:03 Not usedd:04 Detergent/rinse aid dispenserd:05 Circulation pump ond:06 Circulation pump and heater on - max. 75°C (167°F)d:07 Drain pump ond:00 No components onSTARTPROGRAMP: 0 Normal water intake, default settingP: 5 Water intake increases by +5%P:10 Water intake increases by +10%P:15 Water intake increases by +15%L: 0 Time, flow meter switched off, intake time: pulse value x 0.068 [s]L: 5 Time-controlled water intake increases by +5%L:10 Time-controlled water intake increases by +10%L:15 Time-controlled water intake increases by +15%Service Menu - DDW24SDiagnosticsWater intake