Dacor DOC30M977D User Manual

Also see for DOC30M977D Series: Installation instructions User manual User manual

Contents

Dacor DOC30M977D User Manual Manual pdf 94 page image

Information codesOVENDisplayed code Possible cause SolutionC-d0Occurs if control key is short for 1 min. Clean screen; ensure no water is on/around it. Turn off oven and retry. Ifproblem persists, contact a Dacorservice center.C-d1 Occurs if door lock is mispositioned.Press OFF, and then restart the oven.If the problem persists, disconnectall power to the oven for at least 30seconds and then reconnect thepower. If this does not solve theproblem, call for service.C-F0 Occurs if communication betweenMain and Sub PBA is interrupted.C-F2 Occurs if communication betweenMain and Touch is interrupted.C-10The cooking sensor is open when themicrowave is operating.The cooking sensor is short when themicrowave is operating.C-20The oven sensor is open when theoven is operating.The oven sensor is short when theoven is operating.C-21 This code occurs if the internaltemperature rises abnormally high.C-23 The temp probe sensor is shortwhen the oven is operating.C-30The PCB sensor is open when theoven is operating.The PCB sensor is short when theoven is operating.C-31 This code occurs if the PCBtemperature rises abnormally high. Call for service.C-70The steam sensor is open when theoven is operating. Press OFF, and then restart the oven. Ifthe problem presists, disconnect allpower to the oven for at least 30seconds and then reconnect thepower. If does not solve the problem,call for service.The steam sensor is short when theoven is operating.C-72 There are drain system-relatedproblems.C-A2 The cooling motor is operatingabnormally. Call for service.94 English