Dacor DYCT304G Use And Care Manual

Also see for DYCT304G: Installation instructions Installation instructions Use and care manual Installation instructions

Contents

Dacor DYCT304G Use And Care Manual Manual pdf 7 page image

5Single Burner1. Put the burner heads on the burner bases asshown below. Match the correct sizes of heads tobases.2. Line up the notch on the bottom of each headwith the ignitor on the matching base.3. Twist each head back and forth slightly to makesure it is properly seated.4. Put the cap covers on top of the burner heads.The ridge around the bottom edge of the capcover goes around the top of the burner head.Grates1. Gently set the grates on top of the spill tray.2. Position the feet into the corresponding indenta-tions located on the spill tray.Setting Up Your CooktopBurner and Grate AssemblyWARNINGAssemble the burners and grates only when the cooktopis cool.SimmerSear™ BurnerModel DYCT365G: be sure to match the correct sizesof components with each other.1. Place the burner skirt over each SimmerSear™burner head and base as shown.2. Put the burner cap on the burner head of eachSimmerSear™ burner as shown below. Centerthe bottom of the cap inside the base.3. Put the cap cover on top of each SimmerSear™burner cap. The ridge around the lip of the capsecures the cover to the cap.* The burner head on the SimmerSear™ burnerassembly is permanently attached to the burnerbase. It cannot be removed by the user.SimmerSear™ Burner AssemblyBurner capBurner head *Burner baseBurner skirtCap coverWide sidedownBurner headIgniterNotchCap coverBurner baseLine up notchwith igniterbottom ofburnerSingle Burner AssemblyGrate AssemblySpill tray