Dacor ER36d Installation Instructions Manual
Also see for Epicure ER36D: Instruction manualInstructionsInstallation instructionsUse & care manualPlanning guide
                    | |
Contents
| 
16Installation InstructionsCooktop AssemblyWARNINGNever attempt to operate the range’s cooktop with any of theburner rings, burner caps or grates removed.• Remove the burner rings, burner caps and grates from theirshipping packages.• Install the burners as shown. The location, type and size ofthe burners varies with the range model number.• Gently set the grates on top of the spill tray. Put the legsof each grate inside the corresponding dimples. On modelER36D, the largest grate goes in the center.Crown Burner Installation Stack Burner InstallationSTEP 1: Installburner head. Putlocating tab inkeyed hole.STEP 1: Put burnerring on top of head.STEP 2: Installburner ring. Line upring tabs with headslots. Twist backand forth to assureproper seating.STEP 2: Turn ring untilit drops into place. Twistback and forth to assureproper seating.STEP 3: Install burnercaps. Ridge on cap mustsurround top of ring.STEP 3: Install burnercap. Ridge on cap mustsurround top of ring.BurnerheadBurner ringBurnerringRidge onbottom ofburner capBurner baseBurner headCrown burnerStack burnerSpill trayRidge onbottom ofburner capKeyedhole |
Related manuals for Dacor Epicure ER36D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine