Dacor Epicure EH30 Installation Instructions Manual

Also see for EPICURE EH30: Use and care manual Use and care manual Use and care manual Use and care manual Installation instructions

Contents

Dacor Epicure EH30 Installation Instructions Manual Manual pdf 21 page image

19Turn off power to the hood electrical circuit at the circuit1.breaker or fuse box.Feed the wiring through the wiring access holes in the2.hood. Connect the wiring to the terminal block insidethe hood as shown.Connect the hood wiring to an electrical junction box3.on a dedicated circuit. See page 6 for specifications.Connect it according to the wiring diagram below or onthe following page.L1N1GndNot usedInstallation InstructionsTo junctionbox Hood PowerTerminalsGround (Green)Neutral (White)Hot (Black)GREENGREENWHITEWHITEBLACKBLACK3 wire connection to Junction BoxUL/CSA approvedNEMA strain reliefTo house circuit breakerpanel or fuse boxTo range hoodJunction BoxWire Nut,3 placesFinal Electrical InstallationwArningTo avoid electric shock or fire hazard, prior to connecting the electrical wiring to the hood, make sure that power to•the hood power supply line is turned off at the fuse box or circuit breaker panel.Improper connection of the hood electrical wiring may create an electric shock or fire hazard and may result in dam-•age to the hood’s electrical system. See page 6 for specifications.Do not ground the hood to the neutral (white) power supply wire. Connect the hood ground wire to a separate, prop-•erly grounded wire installed by a licensed electrician.Make sure all wire used is capable of handling the total connected load. See page 3.•

/ 24

Related manuals for Dacor EPICURE EH30