10bEFORE OPERATINGBefore operating your new Microwave in a Drawer make sureyou read and understand this operation manual completely.• Before the Microwave in a Drawer can be used, followthese steps:1 Plug in the Microwave in a Drawer. ENJOY YOURMICRO- WAVE TOUCH CLEAR AND TOUCHCLOCK will appear.2 Touch the STOP/CLEAR pad. : will appear.3 Set clock.TO SET THE CLOCK1 Touch TIMER/CLOCK pad and number 2.2 Touch number pads for correct time of day and touchTIMER/CLOCK pad again.This is a 12 hour clock. If you attempt to enter an incorrectclock time, ERROR will appear in the display. Touch theSTOP/CLEAR pad and re-enter the time.• If the electrical power supply to your Microwave in aDrawer should be interrupted, the display will intermittentlyshow ENJOY YOUR MICRO- WAVE TOUCH CLEARAND TOUCH CLOCK after the power is reinstated. Ifthis occurs during cooking, the program will be erased. Thetime of day will also be erased. Simply touch STOP/CLEARpad and reset the clock for the correct time of day.Note:• The Microwave in a Drawer can be programmed with thedrawer open except for START/EASY MINUTE.TIMER1 Touch TIMER/CLOCK pad and number 1.2 Enter time.3 Touch TIMER/CLOCK pad again.To cancel timer, touch STOP/CLEAR.STOP/CLEARTouch the STOP/CLEAR pad to:1 Erase if you make a mistake during programming.2 Cancel timer.3 Stop the Microwave in a Drawer temporarily during timedcooking.4 Return the time of day to the display.5 Cancel a program during cooking, touch twice for timedcooking.OPEN OR CLOSE dRAWERAlways press the OPEN or CLOSE pad on the control panelto open or close the Drawer.Do not push or pull the Drawer by hand, except in caseof emergency, such as a power failure. If necessary, pushor pull slowly.