Dacor MMDV30S Installation Instructions Manual

Also see for In-A-Drawer MMDV30S: Use and care manual Installation instructions Use and care manual Installation instructions and owner's manual Installation instructions

Contents

Dacor MMDV30S Installation Instructions Manual Manual pdf 7 page image

5anti-tip blockNorMal INSTallaTIoN STepSANTI-TIP BLOCK INSTALLATION INSTRUCTIONSTo reduce the risk of tipping of the drawer, the Anti-Tipblock must be properly installed located 14 ³₄" abovethe floor on which the Microwave In-A-Drawer™ will sit.The 6" Anti-Tip block must be provided by the installer.See Figures 2 and 6 for (24") or Figures 4, 5, and 6(for 30"). The Anti-Tip block prevents serious injury thatmight result from spilled hot liquids.If the drawer is ever moved to a different location, theAnti-Tip block must also be moved and installed. Wheninstalled to the wall, make sure that the screws completelypenetrate the dry wall and are secured in wood or metalDesign SpecificationsVerifying package ContentsRemove all packing materials from inside the drawer.•DO NOT REMOVE THE WAVEGUIDE COVER, which islocated on the top of the Microwave In-A-Drawer™.WaveguideCoverSealingSurfaceRemove the feature sticker, if there is one. Check•the drawer for any damage, such as misaligned orbent drawer, damaged drawer seals and sealingsurfaces, broken or loose drawer guides anddents inside the cavity or on the front side of thedrawer. If there is any damage, do not operatethe Microwave In-A-Drawer™ and contact yourdealer or a DACOR AUTHORIZED SERVICER.SealingSurfaceOvenCavityFigure 7electrical outlet4"5"electrical outlet locationFigure 8The electrical requirements are a 120 volt 60 Hz, AConly, 15 amp. or more protected electrical supply.It is recommended that a separate circuit servingonly this appliance be provided.The drawer is equipped with a 3-prong groundingplug. It must be plugged into a wall receptacle thatis properly installed and grounded. Should you onlyhave a 2-prong outlet, have a qualified electricianinstall a correct wall receptacle.NOTE:If you have any questions about the grounding orelectrical instructions, consult a qualified electricianor service person.so that the block is totally stable. When fastening, besure that the screws do not penetrate electrical wiringor plumbing.4"5"electrical outlet locationAnti-Tipblock(6")Figure 6Installation Instructions