PLANNINGGUIDEWeb: http://www.Dacor.comCorporate Phone: 800-793-0093Specifications are subject to change without notice.See installation instructions for additional details. 4.9SGM304, SGM365, SGM46630”, 36”, 46” Wide,Preference™ Gas Cooktops 1/230"(762mm)21"(533mm)4" (102mm)Chassis height1/4" (6mm) Min.to combustiblesbelow chassis27 1/2"(699mm)19 7/8" (505mm)3 1/8"(79mm)7 1/2" (191mm) Min.to combustibleside wall abovethe cooktop(both sides)2 1/4"(57mm) Min.VerticalcombustiblesurfaceRearwall2"(51mm) Min.25" (635mm)Minimum Cutout Dimensions forModel SGM30436"(914mm)21"(533mm)19 7/8"(505mm)33 3/4"(857mm)4" (102mm)Chassis height3 1/8"(79mm)1/4" (6mm) Min.to combustiblesbelow chassis7 1/2" (191mm) Min.to combustibleside wall abovethe cooktop(both sides)2 1/4"(57mm) Min.VerticalcombustiblesurfaceRearwall2"(51mm) Min.25" (635mm)Minimum Cutout Dimensions forModel SGM36521"(533mm)4" (102mm)46"(1168mm)44 1/2"(1130mm)19 7/8" (505mm)3 1/8"(79mm)1/4" (6mm) Min.to combustiblesbelow chassis7 1/2" (191mm) Min.to combustibleside wall abovethe cooktop(both sides)VerticalcombustiblesurfaceRearwall2 1/4"(57mm) Min.2"(51mm) Min.25" (635mm)Minimum Cutout Dimensions forModel SGM466Revised07/18/08WARNING1. Observe all governing codes and ordinancesduring planning and installation. Contactyour local building department for furtherinformation.2. This appliance must be installed in accordancewith the accompanying installationinstructions.All tolerances +1/16” -0 (+1.6 mm, 0) unless otherwise noted.