78video recording & savevideo recordingSelect by clicking “Rec Start” in right button of Mouse after selecting channel user wants to record duringmonitoring. It can record max. 10 minutes of video During Quick Recording, recording time is indicated on video.If “Rec Stop” is pressed by clicking right mouse button,recroding stopped. Then, open the dialogue box to storerecorded files. At this time, user can save it to the directorywith any file name by user.Saved recording file is saved into “*.re4” file format. re4 file canplayback through Control Center Playback program or MiniPlayer program.Saving videoThere are 3 types for saving Video - jpg, bmp, eye, saving means the function to record 1 frame of currentmonitoring channel.To save video, select the channel and click right button of mouse. And select “Save As” and point out the locationand press Save button.Using PTZDuring monitoring, select a channel with PTZ configurationand right-click to select “PTZ” to use PTZ. PTZ control letsusers use Pan/Tilt, Zoom/Focu functions.Pan, Tilt controlThere is a cross line in the middle and click image to operatePan, Tilt. In the middle click Left/Right direction to control Pan,and Click Up/Down direction to control Tilt. The further it isclicked from the middle, the faster Pan/Tilt will operate.Zoom, Focus controlMove mouse to the edge of left & right to see slide bar for Zoom, Focus.The unit Area Zoom In available has Zoom Zero operating button. It can zoom in/out using slide bar at left ofimage, left slide bar can control Focus.Move to PresetIn case of Preset set, Mouse on image press right button for pop-up menu and “Goto Preset” is indicatedadditionally. When select Preset list, it moves to Preset position selected. Preset should be set up by user inadvance.Activating AuxiliaryIn case of Preset set, “Auxiliary” is indicated additionally, and it operates action when select registered menu.Supported PTZ camera list can be refereed to (PTZ manipulation).