16Connections andASSEMBLINGScart socketThis is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD.In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode.If not, press the AV button on the remote controller.The AV will be displayed on the screen with the current programme number.In AV mode, you can change the TV programme number with the VW buttons or the Number buttons 0~9.You must turn the external equipment off to return to the TV mode or press the button. In SCART Slow SW mode, when you insert the tape without tab, it will playback.But, in SCART Fast SW mode, when you insert the tape without tab, it will not playback and only loading. If you insert the SCART plug in playback status it will change to scart mode and VCR will be modified to stopmode.PIN Signal Designation Matching Values1 Audio Out (linked with 3) 0.5Vrms, lmp < 1kΩ (RF 60% MOD)2 Audio In (linked with 6) 0.5Vrms, lmp > 10kΩ3 Audio Out (linked with 1) 0.5Vrms, lmp < 1kΩ (RF 60% MOD)4 Audio earth5 BIue earth6 Audio In (linked with 2) 0.5Vrms, lmp > 10kΩ7 Blue In 0.7Vpp +3dB, lmp 75Ω8 Slow (Function) Switching TV : 0-2V, PERI : 9.5-12V, lmp > 10kΩ9 Green earth10 NC11 Green In 0.7Vpp +3dB, lmp 75Ω12 NC13 Red earch14 NC15 Red In 0.7Vpp +3dB, lmp 75Ω16 Rapid Blanking Switching Logic 0:0-0.4V, Logic 1:1-3V, lmp 75Ω17 Video earth18 Rapid Blanking Earth19 Video Out 1Vpp +3dB, lmp 75Ω20 Video In 1Vpp +3dB, lmp 75Ω21 Common earth