Daewoo 2594ST Instruction Manual

Also see for 2594ST: Service manual

Contents

Daewoo 2594ST Instruction Manual Manual pdf 8 page image

DAILY USEThe set has a total of 70 programme numbers, 0..69.The NUMBER button 0..9 are used for direct programme selection.In order to select two-digit programm, press the second numbered buttonwithin two seconds.Switch through the programme number step by step with the UP/DOWNbutton.SELECTING A PROGRAMME NUMBERVOLUME CONTROLAdjust the volume with the VOLUME ( ) DOWN/UP buttons on thefront of the set, or with the LEFT/RIGHT button on the remote control.MUTEPressing the MUTE button ( ) once turns the sound off.The sound returns if the button is pressed once more or the programmeno. is changed.NORMAL PICTURE SELECTIONWhen you press the NORMAL button repeatedly you can call up three pic-ture settings;for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE(adjustable picture).PICTURE CONTROLPress the MENU button to call up the MAIN MENU.Press the OK button to call up the PICTURE MENU.You can select each function with the UP/DOWN buttons.Use the LEFT/RIGHT button adjust each function:BRIGHTNESS( )-CONTRAST( )-COLOUR( )-SHARPNESS( )-TINT( ).* The TINT is active only in NTSC system.The last set value is automatically stored in FAVOURITE mode.Note that if you set the brightness and contrast values too low, the On-screen-display become dark.SOUND CONTROLPress the MENU button to call up the MAIN MENU.Press the OK button on the SOUND line.Select the required function by moving the cursor with the DOWN or UPbutton. Use the LEFT or RIGHT button to adjust the level of each function.1. BASSUsed to increase or decrease the bass of sound.2. TREBLEUsed to increase or decrease the treble of sound.3. BALANCEAdjust the balance for the best stereo effect for your room conditions.4. PSEUDOUsed to obtain a pseudo stereo effect with mono transmissions.VOLUME, PICTURE AND SOUND CONTROLPICTURE3163313100SOUND1616007