Daewoo AKD-0105 Series Service Manual

Contents

11. PRODUCT SPECIFICATIONSAUDIO SECTIONMaximum output power : 35watts per channel into 4 ohms.Load impedance : 4 ohmsTotal harmonic distortion : Less than 10% at 12 wattsFrequency response : 100Hz( + 3 dB ), 10kHz(-5 + 3 dB )Control Bass / Treble : 10 + 3 dB at 100Hz/10kHzTUNER SECTION(FM) Tuning range : 87.5 to 108MHzUsable Sensitivity (MONO) : 12dB uV(4 uV / 75ohms)Signal to noise ratio (at 60dBu) : More than 50dB(MW) Tuning range : 522 to 1620kHz at Europe530 to 1710kHz at U.S.AUsable Sensitivity : 30dBuV (75ohms at 100kHz)(LW) Tuning range : 144 to 288kHzUsable Sensitivity : 40dBuVCD SECTIONSignal to Noise ratio : 70dB (Using the A filter)Dynamic range : 85dBChannel Separation : 50dBTotal Harmonic distortion : 0.1%Revolution : 12m/s~1.4m/s (500rpm~200rpm)Laser (semiconductor laser) : Wave length 785nmGENERALPower requirements : DC 12.0V / Rated : 14.4V(Usable : 10.8 ~15.6V)Negative groundCurrent consumption : 10A MaximumDimension (W x H x D) : 178 x 50 x 156 mmWeight(Net) : 1.75 kgDesign and specifications are subject to changes for improvements without notice.The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potentialdifference generated by the charged electrostatic load, etc. on clothing and the human body.During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which isincluded in the repair parts.The flexible board is easily damaged and should be handled with care.* Use of controls or adjustments or performance of procedure other than those specified here-in may result inhazardous radiation exposure.* During repair, do not take the Optical Pick-up block apart.If there is a breakdown in the Optical Pick-up block (including laser diode), replace the entire deck mechanism.