Daewoo CP-520 Service Manual

Contents

Daewoo CP-520 Service Manual Manual pdf 46 page image

CP-520/520A/520F Service ManualDTV R&D Europe 45intercarrier and an external second SIF(2NDSIFEXT), e.g. an intercarrier coming from a PIPfrontend. In other applications a 10.7MHz radio IF or satellite FM may be connected to this input.The selected SSIF passes some anti alias filtering, is amplified in an AGC amplifier (SSIF AGC)and is then converted from analogue to digital (SSIF ADC).The audio signal out of the AM demodulator is connected to the analogue crossbar at the videoprocessor. All other inputs to this multiplexer/audio switch come from external, either from a PIPfrontend or SCART/CINCH(AUDINx) or the DAC output signals from the digital controller. Theaudio AD converters are digitising the audio signals foreseen for further digital processing. Onestereo output (AUDOUTS) is available for connections to SCART/CINCH sockets.The sound part on the digital controller consists of the demodulator/decoder(DEMDEC), a digitalinput crossbar, the digital audio processing for the loudspeaker and DAC channels, the I2Sprocessing and interfacing, a digital output crossbar as well as the DA conversion.An auxiliary audio control (volume control, AUX audio contr.) is available on the video processor.Here it is applied to the headphone channel.The part of the concept located in the digital controller will be described in the next chapters.5.4.2 Functional Overview Of the digital controller sound partThe digital controller sound part consists of the SSIFADC, audio ADCs, DEMDEC HW, the soundDSP core, audio DACs and I2S interface hardware as shown in fig below. The DEMDEC part ofthe Sound DSP is used for the decoder and partly demodulator tasks. The AUDIO part providesthe sound features, from the level adjust unit up to the output crossbar. Audio DACs and I2Shardware are converting the processed signals to analogue or digital audio.The SSIF signal is applied to the SSIF ADC for conversion and is then fed to the DEMDEChardware processing mainly for demodulation but also some decoding tasks. Remaining