Daewoo D35S-2 Disassembly/assembly
Also see for D35S-2: Operation & maintenance manualService manual
                                          | |
Contents
| 
Vehicle Systems Disassembly & AssemblyEnd By :a. Install floor plate.b. Install mast ** Refer to the Mast System Disassembly & AssemblySection for further informationEngineRemove & Install EngineNOTE : Procedures for LP gas and diesel enginesare all similar. The engine shown in the followingillustrations is for diesel engine.Start By :a. Remove overhead guard *b. Remove hood (with seat) assembly *c. Remove counterweight *d. Remove floor plate.e. Remove hydraulic control valve ** Refer to the topics “Overhead Guard”, “Hood (withseat) Assembly”, “Counterweight” and “HydraulicControl Valve” in this module.1. Disconnect all hoses from radiator (3). Loosenbolts (1) and (2) and remove radiator (3).2. Disconnect air intake hose (4).3. Disconnect battery cables and remove battery (5)and battery tray assembly.4. Disconnect fuel lines from the engine.5. Disconnect accel cable and engine stop motorcable from the engine.39Tools Needed ALink Bracket 1IACD262P54IACD263PIACD261P312 |
Related manuals for Daewoo D35S-2
manualsdatabase
Your AI-powered manual search engine