52NORMAL TIMER RECORDINGTimer Recordings For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place and with sufficient free space for the recording.Call the player’s "SETUP", choose "TIMER PROGRAM".Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...... and confirm.1Type in one after the other:• The programme location number;• the time the broadcast starts,• the time the broadcast ends,• the day of the broadcast, if it is not today.• Select LP if you wish to make a very long recording .2If you wish to make changes:Move to the position you want to change using the [œ/√] buttons.Change the setting using the […/†] or [number] buttons.If all setting are ok, press [œ or √], till you see “OK : CONFIRM” inthe bottom line.Confirm.3Switch your player off.• Wait a few seconds after typing a one-digit-number.• If you have made a mistake, move to the position you want to change using the [œ/√] buttons andchange the setting.• If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, themachine will record the first programme completely then continue with the second one.• If there is no sufficient free space for the recording on the cassette the video switches automatically to“LP” for double recording capacity.• The recorder will eject cassettes which have the safety tab removed.…/†:SELECT(AV)0-9 :SETUP(PR)œ/√: CORRECT SETUP:ENDPR --START TIME --:--END TIME --:--START DATE --/--TAPE SPEED SPTIMER PROGRAM (ONCE)PR 01START TIME 18:10END TIME 20:30START DATE 20/06(FRI)TAPE SPEED LP…/†:SELECT(AV)0-9 : SETUP (PR)œ/√: CORRECTOK:CONFIRM SETUP:ENDTIMER PROGRAM (ONCE)HOW OFTEN DO YOU WANTTO RECORD THIS PROGRAM?…/†:SELECTOK:CONFIRM SETUP:ENDONCEWEEKLY(ONCE A WEEK)DAILY(MON-FRI)DAILY(MON-SAT)DAILY(MON-SUN)