23Menu OperationPicture Control1. Press the MENU button to call up the menu.2. Move the selection bar to the Picture menuwith the ▼PR▲ buttons.3. Press the VOL► button.4. Select the item to adjust with the ▼PR▲buttons.5. Press the ◄VOL► buttons.The level adjust mode of each function appears :“Brightness”, “Contrast”, “Colour”, “Sharpness”, “Tint”.You can adjust the level of each item by using the◄VOL► buttons.NOTE:Tint is displayed only when receiving a NTSCsignal. The adjusted levels are storedautomatically in Favourite mode.NOTE:You cannot adjust the colour saturation in PC andDVI mode.This is PRE-SET to the correct level by the system.Smart Picture mode Selection1. Select Mode from the Picture menu.2. Using◄VOL► buttons, Select the desiredmode.Four pictures settings;Standard > Dynamic > Cinema > FavouriteNote :When you press the Picture button on the remotecontroller repeatedly, you can call up fourpictures settings.Standard: For a highly defined image in anormally bright roomDynamic: For a clear-cut image emphasizinghigh contrast for sports viewingCinema: Ideal for moviesFavourite: Allows the user to customize settingsas desired.CHPictureSoundScreenInstallFeaturesMove Select Menu:SaveMode StandardBrightness 48Contrast 63Colour 50Sharpness 50Tint 0