Daewoo DLP-26C2 Service Manual

Also see for DLP-26C2: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Daewoo DLP-26C2 Service Manual Manual pdf 26 page image

SERVICE MODE-26-• Name : _____• System : PAL• Sound : BG• Fine Tuning : 0- Edit5-2. Entering SERVICE MODEUsing the Service Remote controller, you can enter service mode directly.5-2-1. Adjustment REMOCON and EEPROM initial DATAA. The adjustment Specification use the SERVICE REMOCON R-34SVC(S/N: 48B3034SVC)B. Adjustment DATAKey Name Details Function RemarkDefault AdjustmentS1 Heat-RunS2 - Gumi Channel Map WriteS3 Volume Test Volume : 0 -> 32 -> 63 -> L -> R1. Connect P701(Jumper) of Main PCB.2. Press the "S4" key of service remocon.S4 EDID write Operating Method And then, TV set display "EDID WRITE OK"upper left of screen.3. After EDID WRITE, remove P701(Jumper)S5 PANEL TEST PATTEN : BLACK -> WHITE -> RED -> GREEN -> BLUEPATTEN : BRIGHT MIN -> CEN -> MAX ->S6 PICTURE TEST CONTRAST MIN -> CEN -> MAX ->COLOR MIN -> CEN -> MAXS7 - DEMPOL Channel Map Write1. Press the "S8"key of service remocon.EEPROM Erase 2. Press the "OK"key of user remocon.operating method And then, TV set display "EEPROM CLEARED"upper left of screen.White 3. When you turn off/on AC, EEPROM data will be cleared.balance Default AdjustmentS8 /EEPROM 26"(32") - FIXErase CUT OFF R 379(400) - FIXCUT OFF G 447(448) - FIXCUT OFF B 431(403) - FIXDRIVE R 373(340) - FIXDRIVE G 328(310) - FIXDRIVE B 322(330) - FIXAUTO Y CLAMP DO NOT USEAUTO Y GAIN DO NOT USE