Daewoo DPM-42A1LBSB User Manual

Daewoo DPM-42A1LBSB User Manual Manual pdf 51 page image

51Engaging PIP modeSWAPPOSITIONPIP PRS.EFFECT SOURCE PRF.F/SLOWPLAYF.R/SLOW STOPNEXTOPEN/CLOSEPREV PAUSE• Press the ‘PIP’ button once on the remote control to engagethe Picture-in-Picture mode.• By pressing the button repeatedly, it will show the followingcycle.• If switched to P-by-P (Picture-by-Picture) mode, the screenwill be split in half. The screen on the left side is the mainpicture, and the sub-picture will be on the right of the screen.Position of the Sub-picture• When PIP mode is engaged, the sub-picture can bedisplayed in one of the four corners by using'POSITION' button.• Whenever pressing the button, the sub-picture will becycling in the following order.Also, using “ VOL ” and “ PR ” button, the sub-picture can be moved to any position you want.< Using “ VOL ”and “ PR ” button >Swap the pictures• In order to swap between the main picture and sub-picture,press the ‘SWAP’ button.• However, at POP5 and POP12, the pictures are notswapped. Main picture will change to the active sub-picture.• Also, only TV channels are available for the sub-pictures ofPOP5 and POP12.The sub-pictures search channels continuously until POP modeis exited.312Screen Adjustmentof the Sub-picture• Size and AlphaBlend of the sub-picture can beadjusted on ScreenMenu of OSD.• These functions areavailible only in PIPMode.Pip SizeAdjusting the size of thesub-picture with “ VOL ”buttons.Alpha BlendThe adjustment of alphablend allows the sub-pictureto be translucent.The translucent rate iscontrolled with“ VOL ” buttons.Watching Two Pictures Simultaneously ‘Position’ button>POP5P-by-PPIPMainSubMain Main Sub Sub1Main MainSub2 Sub3Sub4Sub5POP12Sub1 Sub2Sub9Sub10Sub11Sub12Sub3Sub8Sub4Sub5Sub6Sub7MainSubSubSubSubSubMainMainMain• PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously.POP mode is used in searching memorized 5 or 12 channels.