Daewoo DT-K6323D-KS3 User Manual

Contents

Daewoo DT-K6323D-KS3 User Manual Manual pdf 11 page image

17Time Lapse Video Cassette Recorder16 Time Lapse Video Cassette Recorder✔• To modify or cancel timerrecording, press theSTANDBY/ON(POWER)button to cancel the timerrecording mode.9 Press the SET – (or +) button to set the recordingstop minutes (eg : 00), then press the SHIFT√button.10 Press the SET – (or +) button to select therecording speed (eg : 18), then press the SHIFT√button.• The cursor is moved to the N/Y position.11 Press the SET – (or +) button to select “Y”.Y . . . . . recording will take placeN . . . . . recording will not take placeProgrammed timer recording Example 1• Repeat steps 4 to 11 to program timer recordings forother days of the week.• To set two or more timer recordings the same day ofthe week, press the SHIFT † button, until the cursorlocated in the day of the week for the second recording,then press the SET – (or +) button, to set the desiredday of the week. With each press of the SET – ( or +)button, the day will change as indicated below.SET – : ‹– direction , SET + : –› direction12 Press the MENU button three times, the normalscreen is displayed.13 Press the STANDBY/ON(POWER) button.• The timer recording indicator “ ”will light on thedisplay panel. The VCR is now in timer recordingstand-by mode.✔• If the set stop time isearlier than or the sametime as the set start time,the VCR will consider thestop time to be thefollowing day.Program Timer RecordingThere are two program timer recording methods, dailyrecording or recording on certain days of multiple weeks(weekly recording).Example 1 : To record on every Thursday from 10 : 00 to18 : 00 , in 18-hour mode (recording speed)1 Make sure that the set date and time are correct.2 Load a cassette tape with erasure prevention tab inplace.3 Press the MENU, SHIFT†, SHIFT√, SHIFT√ buttonsin sequence to display the TIMER PROGRAM SET(1)menu.• The white block cursor is on “SUN”(Sunday).4 Press the SHIFT† button, until the cursor is on “THU”.5 Press the SHIFT√ button.• The cursor is moved to the recording start hour position.6 Press the SET – (or +) button to set the recordingstart hour (eg : 10), then press the SHIFT√ button.• The cursor is moved to the recording start minutesposition.7 Press the SET – (or +) button to set the recordingstart minute (eg : 00), then the SHIFT√ button.• The cursor is moved to the recording stop hour position.8 Press the SET – (or +) button to set the recordingstop hour (eg : 18), then press the SHIFT√ button.• The cursor is moved to the recording stop minutesposition.