Daewoo DTD-14D3 Instruction Manual

Also see for DTD- 20D4: Instruction manual

Contents

Daewoo DTD-14D3 Instruction Manual Manual pdf 11 page image

PICTURE-IN-PICTURETo Watch a external source as a sub-picturePress the PinP button to display a sub-picture.Press the sub TV/VIDEO button repeatedly to select the input forthe sub picture. A TV picture will appear repeatedly.(AV1 AV2 AV1 ... )To Swap the main and sub-picturePress the SWAP button when a picture-in-picture is displayed.The main picture and sub-picture are swapped.Press the SWAP button again to swap again.To Select the Size of the sub-picturePress the SIZE button when a sub-picture is displayed.The sub-picture will be smaller. To return to be normal size, pressthe SIZE button again.To Change the Position of the sub-picturePress the POSITION button repeatedly when a sub-picture isdisplayed.The display position of the sub-picture will changed in order toPIP mode.SLEEPBy pressing the SLEEP button repeatedly, you can select one ofthe following settings:00:00 00:20 00:40 01:00 01:20 01:40 02:00The set will be turned off after the time you set.TIMERIn the Menu, Select Timer menu.SETTING THE CLOCKPress the RIGHT button on the CLOCK line.Set the hours and minutes with the UP/DOWN buttons.The clock will start.Note that if you turn the TV off with MAIN POWER button, theclock setting is lost and must be reset if necessary.SETTING THE WAKE UP TIMESet Wake up time in the same way as the SETTING THECLOCK above.Set Timer :Yes or :No with the UP/DOWN button .When Timer is “ Yes ” , the function is enabled.Set Wake up Pr using UP/DOWN button.When Wake up time is operative, the set will switch on to thisprogramme number at the set time.TI M ERWAKE UP TI M EWAKE UP PROFF TI M EPR01CLOCK--:----:--POSITIONRETURNCURSORCLEARM--:--PR3 412