Daewoo DTL-2950 Manual Instruction

Also see for DTC-20, DTC-21, DTY-21, DTY-25: Service guide Setup manual Manual instruction

Contents

Daewoo DTL-2950 Manual Instruction Manual pdf 10 page image

8PICTURE CONTROLYou can select three pictures settings, by using the remote control NORMAL button (A17) :- Normal I (standard hard picture)- Normal II (standard soft picture)- FavouriteFor other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu.If an NTSC signal is received, then the TINT adjustment will also be available.SLEEP FUNCTIONThe set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEPbutton (A4), you can enter one of the following settings :OFF 20 min 40 min 60 min 80 min 100 min 120 min OFF01 BBC1STEREO20Remaining time (minutes)before TV set switches offFORMAT SELECTIONAUTO setting :If picture format signalling data isreceived, then the most appropriateZOOM format will be automaticallyselected. In the absence of this data, thedefault ZOOM format will be selected(seepage 13, ZOOM AUTO function underFEATURES MENU).Otherwise, the preferred mode of the usercan be forced by repeated pressing of theremote control ZOOM button (A15):Television Format 4:3The following picture formats areavailable:AUTO 14:9 16:9 FULL SCREEN AUTOTelevision Format 16:9The following picture formats areavailable:AUTO 4:3 ZOOM 14:9 ZOOM 16:9FULL SCREEN AUTOThe SLEEP time remaining (before TV turn-off ) can be seen again at any time by onetouch on the remote control SLEEP button (A4).A second touch (while the status display is active) will modify the SLEEP time remaining.01 BBC1FAVOURITE18:3001 BBC1NORMAL I18:3001 BBC1NORMAL II18:30