7ALIGNMENT INSTRUCTIONS1. SERVICE MODE ADJUSTMENTSFollow the steps below whenever service adjustment is required. See Table- A and Table- B to determine ifservice adjustments are required.1) How to enter the service mode using the user remote control.• Turn the set on.• Direct the remote control to the reception window of TV.• Push buttons of remote control in sequence as follows.1 → MUTE → DISPLAY → MUTE• Then, the screen will appear as follows.• Using the channel up or channel down button, select the item you wish to adjust.(The color of selected item turns into the red.)• Press the volume up or down button to enter in the service mode you wish to adjust.2) How to memorize the adjusted values in the service mode.• Must press DISPLAY button the state which the screen is displaying each of service menusafter all adjustments are completed each of all service menu.Table-A : Adjust the values of service mode when a part is replaced.PARTREPLACEDADJUSTMENT NOTESNECESSARY UNNECESSARYI701(U-COM) O Data is stored in I703.I101(MAIN) OI703(EEPROM) OInitial setting values are written from I701.Adjusting ItemsCRT O Adjust items related to picture tube only.(White Balance adjustment)S2 SCRNS5 IFCS6 GEOS8 W/BS9 DPS12 FACTS5 RFAGCDS6 H.SHIFT/V.SHIFT/V.SIZES8 RD/BD/RB/GB/BBS9 Brightness